精雕机厂家

News

Product

keywords

Contact

Company:Shenzhen Yadis Electronic Technology Co.,Ltd

Contacts:13728719739 Mr Hu

             18665897736 Mr Li

Tel:0755-81499136

Fax:0755-29875493

Web:www.szyadis.com

Adds:3 / f, building B1, junfeng industrial zone, no.176, chongqing road, fuyong town, bao 'an district, shenzhen

Does the home of fine carving machine appear malposition reason in fine carving jewelry process?

Your current location: Home >> News >> Knowledge

Does the home of fine carving machine appear malposition reason in fine carving jewelry process?

Date of release:2018-07-12 Author: Click:

           It is a kind of CNC machine. Metal laser fine engraving machine can perform non-contact cutting and punching for metal or non-metal sheet and pipe. It is especially suitable for laser cutting of stainless steel, iron plate, silicon sheet, ceramic sheet, titanium alloy, epoxy, A3 steel, diamond and other materials. The equipment has stable and reliable operation, good quality, high efficiency, simple operation and convenient maintenance. The following are the reasons for the dislocation in the process of carving the jewelry:

 精雕机厂家

 

           (1) if the line of the machine tool of the fine carving machine is broken, this phenomenon will also occur. (2) reason for spindle motor: if the stepping motor or servo motor is the reason, the whole machine will not move in a certain direction and the screw rod will not move. (3) reasons for interface board, main board and transfer board: if the interface board, main board and transfer board are broken, the machine will not move in one direction or three axes during the working process, resulting in the dislocation of precision carving. (4) reasons of the machine itself: there are problems or looseness of some parts of the machine, and dislocations of impurities on the surface, such as loose coupling and broken coupling, which will occur dislocation, as well as dislocations of guide rails and screw rods without cleaning and refueling for a long time. (5) driver reasons: there is a problem with the structure of the driver itself or the original electronic device, which may cause dislocation.

           If you don't have a lot of times, and you're going to slow it down a little bit, sometimes it's going to be perfectly sculpted which means that the drive hasn't been completely broken, and if you put it in the wrong place at the beginning it means the drive is completely broken, which is something that you can fix or replace.


The address of this article:http://en.szyadis.com/news/380.html

Key word:五轴精雕机,首饰精雕机,精雕机厂家

Recently browse:

  • Service
  • number
    18270919270
  • Message
  • web site
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Telephone
    Telephone
    mailbox
    mailbox
    address
    address