精雕机厂家

News

Product

keywords

Contact

Company:Shenzhen Yadis Electronic Technology Co.,Ltd

Contacts:13728719739 Mr Hu

             18665897736 Mr Li

Tel:0755-81499136

Fax:0755-29875493

Web:www.szyadis.com

Adds:3 / f, building B1, junfeng industrial zone, no.176, chongqing road, fuyong town, bao 'an district, shenzhen

The cause of alarm and the solution to the problem of jewelry carving machine

Your current location: Home >> News >> Company news

The cause of alarm and the solution to the problem of jewelry carving machine

Date of release:2018-07-12 Author: Click:

首饰精雕机

             Many users have this question, why would the jewelry carvings machine alarm phenomenon? What causes the alarm failure? What's the solution? So today the fine carving machine factory home small editor to answer for everybody:

             1. When the jewelry engraving machine is not properly grounded to the computer, it will have an alarm failure. When this happens, we should turn off all the connection power in time, and then connect the connection line between the computer and the machine correctly, and finally we can solve the problem successfully.

             2. When the bench mark exceeds the soft limit value range, the fine carving machine will also have an alarm failure. In view of this situation, as long as the fine engraving machine set value and soft limit value.

             3. When the graphic size designed on the computer exceeds the processing range of the jewelry engraving machine, there will be an alarm failure. When this situation occurs, modify the size of the computer in a timely manner and change the size of the graphics to a size range suitable for fine engraving machine operations, then the problem can be successfully solved.

             4. When the main shaft of the machine and the connecting line of the screw rod become loose, the machine will have an alarm failure. When this problem occurs, what needs to be done is to turn off the power switch of the machine at the first time, and then tighten the screw, the machine can successfully remove the alarm.


The address of this article:http://en.szyadis.com/news/387.html

Key word:五轴精雕机,首饰精雕机,精雕机厂家

Recently browse:

  • Service
  • number
    18270919270
  • Message
  • web site
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Telephone
    Telephone
    mailbox
    mailbox
    address
    address